Inconel Woven Wire Mesh Made of Inconel Wire 600, 601, 625, 718, X-750

An unfolded Inconel 600 woven wire mesh roll with good gloss and supramesh.

Walcoom Inconel supplied in Inconel wire mesh, sheet, coil, bar & plate.

Inconel wire mesh is made of alloy wire of nickel, chrome and iron, which predominantly nickel, chromium as the second element. According to the different chemical composition content, the most common Inconel wire including Inconel 600, Inconel 601, Inconel 625, Inconel 718 and Inconel X-750 and so on.

Inconel woven wire mesh is a special type of metal mesh can adapt to extreme environments but resistant to corrosion, oxidation. Further more Inconel wire mesh is non-magnetic, it can maintain a high strength and good weld ability in a temperature range from below zero to 2000°F (1093°C). Its most typical usage including chemical fiber, petrochemical, aerospace, hydropower, nuclear power, thermal treatment, pulp and paper industry.

Walcoom provide various types and specification of Inconel wire mesh for applications of different industries.

Specification

Material

Inconel wire.
Material type

Inconel 600, inconel 600, inconel 601, inconel 625, inconel 718 and inconel X-750, etc.
Physical Properties of Inconel 625
- Density: 0.303 lb/in³ (8.44 g/cm³).
- Specific Gravity: 8.44.
- Melting Range: 2350 - 2460°F (1280 - 1350°C).
- Specific Heat: 0.098 Btu/lb x °F (410 Joules/kg x °K).
- Magnetic Permeability (75°F, 200 oersted): 1.0006.
Wire diameter

0.0020"–0.12".
Mesh size

4–200 mesh.
Technique

Woven, knitted, perforated.

Inconel woven wire mesh

Inconel knitted wire mesh

Inconel perforated metal
Weave type

Plain weave, twill weave, dutch weave.
Package

Packed in roll, wrapped with moister-proof paper, put into wooden cases, or according to your requirements.

Table 1: Chemical Composition of Inconel
Standard	C	Cr	Cu	Fe	Mn	Ni	S	Si	Al	Cb	Mo	P	Ti	B	C	Co
Inconel 718	0.08	17–21	0.3	Rem.	0.035	50–55	0.015	0.35	0.2–0.8	4.75–5.50	2.8–3.3	0.015	0.65–1.15	0.006	0.08	1.0
Inconel 600	0.15	14–17	0.5	6–10	1.0	72.0	0.015	0.5	-	-	-	-	-	-	-	-
Inconel 601	0.1	21–25	1.0	Rem.	1.0	58–63	0.015	0.5	1.0–1.7	-	-	-	-	-	-	-
Inconel 625	0.1	20–23	-	5.0	0.5	Rem.	0.15	0.5	0.4	3.15–4.15	8–10	0.015	0.4	-	-	-
Inconel X750	0.08	14–17	0.5	5–9	1	70	0.01	0.5	0.4–1	0.7–1.2	-	-	2.0–2.6	-	-	-

Table 2: Specification of Inconel 600 Sheet
Item	Mesh	Wire diameter	Width of opening	Open area
Item	wires/in.	in.	in.	%
IM-600-01	4 × 4	0.12	0.13	27
IM-600-02	4 × 4	0.08	0.17	46.2
IM-600-03	4 × 4	0.063	0.187	56
IM-600-04	5 × 5	0.04	0.16	64
IM-600-05	6 × 6	0.041	0.0126	57.2
IM-600-06	8 ×8	0.047	0.078	38.9
IM-600-07	8 × 8	0.041	0.084	45.2
IM-600-08	8 × 8	0.03	0.095	57.8
IM-600-09	8 × 8	0.028	0.097	60.2
IM-600-10	10 × 10	0.0225	0.075	56.3
IM-600-11	10 × 10	0.015	0.085	72.3
IM-600-12	12 × 12	0.041	0.042	25.4
IM-600-13	12 × 12	0.025	0.058	48.4
IM-600-14	16 × 16	0.036	0.0275	19.4
IM-600-15	16 × 16	0.028	0.035	30.5
IM-600-16	16 × 16	0.025	0.038	36
IM-600-17	16 × 16	0.023	0.04	39.9
IM-600-18	16 × 16	0.018	0.045	50.7
IM-600-19	18 × 18	0.028	0.028	24.7
IM-600-20	20 × 20	0.016	0.034	46.2
IM-600-21	22 × 22	0.015	0.031	45
IM-600-22	24 × 24	0.014	0.028	44.2
IM-600-23	24 × 24	0.012	0.03	50.8
IM-600-24	28 × 28	0.013	0.023	40.4
IM-600-25	30 × 30	0.015	0.018	30.1
IM-600-26	30 × 30	0.01	0.0233	48.9
IM-600-27	35 × 35	0.0055	0.0236	68.1
IM-600-28	40 × 40	0.01	0.015	36
IM-600-29	50 × 50	0.009	0.011	30.2
IM-600-30	60 × 60	0.0075	0.0092	30.5
IM-600-31	80 × 80	0.0055	0.007	31.4
IM-600-32	100 × 100	0.004	0.006	36
IM-600-33	100 × 100	0.0045	0.0055	30.2
IM-600-34	120 × 120	0.0038	0.0046	30.7
IM-600-35	120 × 120	0.002	0.0063	57.8
IM-600-36	200 × 200	0.0021	0.0029	33.6

Table 3: Specification of Inconel 601 Sheet
Item	Mesh	Wire diameter	Width of opening	Open area
Item	wires/in.	in.	in.	%
IM-601-01	2 × 2	0.072	0.428	73.3
IM-601-02	5 × 5	0.041	0.159	63.2
IM-601-03	6 × 6	0.047	0.12	51.8
IM-601-04	10 × 10	0.047	0.053	28.1
IM-601-05	10 × 10	0.0225	0.075	56.3
IM-601-06	10 × 10	0.015	0.085	72.3
IM-601-07	12 × 12	0.025	0.058	48.4
IM-601-08	18 × 18	0.017	0.039	48.3
IM-601-09	24 × 24	0.014	0.028	44.2
IM-601-10	30 × 30 TW	0.017	0.0163	23.9
IM-601-11	30 × 30	0.016	0.017	26.9
IM-601-12	30 × 30	0.015	0.018	30.1
IM-601-13	35 × 35	0.01	0.019	42.4
IM-601-14	35 × 35	0.014	0.015	26.1
IM-601-15	40 × 40	0.01	0.015	36

Table 4: Specification of Inconel 625 Sheet
Item	Mesh	Wire diameter	Width of opening	Open area
Item	wires/in.	in.	in.	%
IM-625-01	4 × 4	0.047	0.203	65.9
IM-625-02	6 × 6	0.041	0.0126	57.2
IM-625-03	8 ×8	0.035	0.09	51.8
IM-625-04	8 × 8	0.032	0.093	55.4
IM-625-05	8 × 8	0.024	0.101	65.29
IM-625-06	20 × 20	0.0115	0.039	60.8
IM-625-07	26 × 26	0.013	0.026	44
IM-625-08	30 × 30	0.012	0.021	40.8
IM-625-09	32 × 32	0.014	0.017	30.6
IM-625-10	32 × 32	0.013	0.018	34.3
IM-625-11	32 × 32	0.01	0.021	46.5
IM-625-12	35 × 35	0.014	0.015	26.1
IM-625-13	35 × 35	0.0135	0.015	27.9
IM-625-14	35 × 35	0.01	0.019	42.4
IM-625-15	40 × 40	0.0105	0.0145	33.65
IM-625-16	40 × 40	0.0085	0.017	43.6
IM-625-17	50 × 50	0.009	0.011	30.3
IM-625-18	60 × 60	0.0075	0.009	30.5
IM-625-19	100 × 100	0.004	0.006	36
IM-625-20	100 × 100	0.0045	0.006	30.3
IM-625-21	100 × 100	0.004	0.006	36

Table 5: Specification of Inconel 718 Sheet
Item	Mesh	Wire diameter	Width of opening	Open area
Item	wires/in.	in.	in.	%
IM-718-01	10 × 10	0.02	0.08	64
IM-718-02	26 × 26	0.013	0.026	44
IM-718-03	30 × 30	0.008	0.025	57.6
IM-718-04	45 × 45	0.003	0.0192	74.8

Table 6: Specification of Inconel X-750 Sheet
Item	Mesh	Wire diameter	Width of opening	Open area
Item	wires/in.	in.	in.	%
IM-X750-01	38 × 36	0.0045	-	69.5
IM-X750-02	80 × 80	0.0055	0.007	31.4

Inconel Woven Wire Mesh – Good Weld Ability and Heat Resisting

Walcoom Inconel supplied in Inconel wire mesh, sheet, coil, bar & plate.

Feature

Specification

Application