Titanium Wire Mesh – 60 Years Service Life, Safe and Reliable Operation

A roll of titanium wire mesh with micro mesh opening.

Walcoom provide titanium woven wire mesh, titanium expanded metal, titanium perforated metal, titanium filter element.

Titanium wire mesh is a metal mesh with special properties. First, it has low density, but highest strength than any other metal mesh; Second, high purity titanium mesh will generate an oxide film with dense adhesion and high inertia in the corrosion resistant media environment, especially in seawater, wet chlorine gas, chlorite and hypochlorite solution, nitric acid, chromic acid metal chloride and organic salt are not corroded. Besides these, titanium wire mesh is also featured with good temperature stability & conductivity, non-magnetic, non-toxic.

From the above, titanium wire mesh is the ideal material for filter element, anode mesh & basket, collector mesh, shielding mesh, mist eliminator, demister pad and tower packing etc.

As a specialized manufacture, Walcoom can provide almost all kinds of titanium wire mesh, e.g. titanium woven wire mesh, titanium expanded metal, titanium perforated metal and so on.

Feature

  • Strong resistance to acid and alkali.
  • Good anti-damping performance.
  • High tensile yield strength.
  • Low elasticity modulus.
  • Non-magnetic, non-toxic.
  • Good temperature stability & conductivity.

Specification

  • Material
    Titanium wire, titanium metal sheet.
  • Chemical Composition
    • C: 0.10%.
    • Fe: 0.30%.
    • H: 0.015%.
    • N: 0.05%.
    • O: 0.35%.
    • Ti: Rem.
    • Other each: 0.1; Total 0.04 max.
  • Wire diameter
    0.002"–0.035".
  • Technique

    Woven, expanded, perforated.

    A picture of titanium woven wire mesh section.

    Titanium woven wire mesh

    A picture of titanium expanded wire mesh section.

    Titanium expanded wire mesh

    A picture of titanium perforated wire mesh section.

    Titanium perforated wire mesh

  • Weave type
    Plain weave, twill weave.
  • Mesh shape
    Square, rectangle, diamond, round.
  • Roll Width
    0.3–2 m.
  • Roll length
    10–30 m.
  • Color
    black or bright.
  • Package
    Packed in roll, wrapped with moister-proof paper, put into wooden cases, or according to your requirements.
Table 1: Specification of Titanium Wire Mesh
Item Mesh Wire diameter Opening width Opening area
Wires/inch inch inch %
TM-01 4 × 4 0.032 0.218 76
TM-02 4 × 4 0.035 0.215 74
TM-03 6 × 6 0.032 0.135 65.6
TM-04 7 × 7 0.025 0.118 68.2
TM-05 8 × 8 0.032 0.093 55.4
TM-06 9 × 9 0.032 0.079 50.6
TM-07 10 × 10 0.035 0.065 42.3
TM-08 10 × 10 0.03 0.07 49
TM-09 10 × 10 0.025 0.075 56.3
TM-10 12 × 12 0.011 0.0723 75.3
TM-11 14 × 14 0.016 0.055 60.2
TM-12 16 × 16 0.006 0.0565 81.7
TM-13 18 × 18 0.01 0.046 67.4
TM-14 18 × 18 0.011 0.0445 64.4
TM-15 18 × 18 0.016 0.04 50.8
TM-16 20 × 20 0.003 0.047 88.4
TM-17 20 × 20 0.02 0.03 36
TM-18 20 × 20 TW 0.016 0.034 46.2
TM-19 24 × 24 0.01 0.032 57.9
TM-20 24 × 24 0.0118 0.0299 51.4
TM-21 26 × 26 0.01 0.029 54.9
TM-22 30 × 30 0.01 0.0233 49
TM-23 32 × 32 0.01 0.021 46.5
TM-24 35 × 35 0.008 0.0206 51.8
TM-25 40 × 40 0.005 0.02 64
TM-26 40 × 40 0.01 0.015 36
TM-27 50 × 50 0.008 0.011 30.3
TM-28 50 × 50 TW 0.004 0.016 64
TM-29 60 × 60 TW 0.009 0.0077 21.3
TM-30 90 × 90 0.004 0.0071 41
TM-31 100 × 100 0.002 0.008 64
TM-32 120 × 120 TW 0.004 0.0043 27
TM-33 150 × 150 TW 0.0027 0.004 35.5

Application

Fields:

  • Military industry.
  • Mechanical industry.
  • Environmental industry.
  • Electroplating industry.
  • Sea water conversion.
  • Satellite and aerospace.
  • Battery industry.
  • Shipbuilding.
  • Petroleum.
  • Medicine & surgery.

Usage:

  • Filter element.
  • Battery skeleton mesh.
  • Inert anodes.
  • Electromagnetic shielding.
  • Mist eliminator.
  • Demister pad.
  • Tower packing.
  • Skull repair and reconstruction.
Inert anode made with titanium expanded metal for electroplating industry.
Demister pad made with titanium wire mesh.
Coffee filter with titanium woven wire mesh.
Necklace ribbon made of titanium woven wire mesh.
Skull mold made of titanium perforated metal for skull reconstruction.
QUICK CONTACT
If you need to consult the price, please contact the business department by E-mail: sales@walcoom.com When you contact us, please provide your detail requirements. That will help us give you a valid quotation.
Full Name *
Country Code * + Phone Number *
Your Website
Message *
Contact Us